Need M20 ETA flywheel

[Notelect]

Flywheel I got is missing metal tab for reference sensor.
Tab looks as such image below

Need either of these part numbers
11221273153
11221705046

Need it before the 27th ideally

Can pay $300 now

[G28I]

Being unfamiliar with the cross overs, would you be able to use an m30 flywheel? I am aware the clutch pressure plate and disc would need to correspond with the selected flywheel. If so, I do have an M30 flywheel available.  

[Bimmerguy2002]

Being unfamiliar with the cross overs, would you be able to use an m30 flywheel? I am aware the clutch pressure plate and disc would need to correspond with the selected flywheel. If so, I do have an M30 flywheel available.  
 

the teeth are incompatible


I think i have a euro 323i flywheel and clutch kit still, will be able to look shortly. It is 13 lbs and has the same stack height as the dual mass with the pressure plate.

[Bimmerguy2002]

if you are still looking, i did have it, its a euro 323i flywheel, single mass with reference pin, sachs friction disc and pressure plate. 450 shipped. It has the same stack height as the dual mass and is just a lighter 325i flywheel but with a reference pin. Just need the 325i throwout bearing.

https://ibb.co/8x7d63W
https://ibb.co/r77z4x4
https://ibb.co/KxwGsQz

[Notelect]

if you are still looking, i did have it, its a euro 323i flywheel, single mass with reference pin, sachs friction disc and pressure plate. 450 shipped. It has the same stack height as the dual mass and is just a lighter 325i flywheel but with a reference pin. Just need the 325i throwout bearing.

https://ibb.co/8x7d63W
https://ibb.co/r77z4x4
https://ibb.co/KxwGsQz

Does this work with an eta m20?

[Bimmerguy2002]

if you are still looking, i did have it, its a euro 323i flywheel, single mass with reference pin, sachs friction disc and pressure plate. 450 shipped. It has the same stack height as the dual mass and is just a lighter 325i flywheel but with a reference pin. Just need the 325i throwout bearing.

https://ibb.co/8x7d63W
https://ibb.co/r77z4x4
https://ibb.co/KxwGsQz

Does this work with an eta m20?

absolutely, the car it was from is an m20 (e30 323i), its just lighter significantly. The same stack height as your assembly as long as you use the corresponding clutch disc and pressure plate as the dual mass one you have has a thinner pressure plate